Introduction
The YS Belt Disc Sander gives your workshop two distinct sanding stations in one compact bench machine - without doubling your footprint.
The 100x915mm belt handles edges, profiles, deburring, and long-contact sanding. The 305mm (12") disc handles flat faces, squaring, and repeatable angle work. Switch between them to match the task, not the tool.
The 750W motor runs at a stable 690 RPM for consistent sanding performance. The adjustable worktable (0-45 degrees) and tilting belt assembly (0-90 degrees) let you lock in the angle and work repeatable bevels, chamfers, and edge profiles without re-setting each piece.
Key Selling Points
Two sanding stations in one machine (belt + disc): one footprint, two distinct workflows - long belt for edges/contours and large disc for flat-face sanding and angle work
305mm (12") sanding disc is larger than many entry-level belt/disc sanders - provides better control and more stable contact on flat surfaces
750W motor delivers consistent sanding performance and reduces stalling during heavier passes across common workshop materials
Worktable tilts 0-45 degrees for repeatable bevel and chamfer sanding without re-marking each piece
Belt assembly supports 0-90 degree tilting for horizontal or vertical sanding depending on the task
OEM/ODM available; 1-year warranty
Core Features
- Belt size: 100 x 915mm
- Disc diameter: 305mm (12")
- Motor: 750W, 230V, 50Hz
- No-load speed: 690 RPM
- Worktable size: 190 x 125mm
- Worktable tilt range: 0-45 degrees
- Belt tilt range: 0-90 degrees
- Machine weight: approximately 15.5-17kg class
- 1-year warranty; OEM/ODM available
Applications
- DIY metalworking enthusiasts deburring cut edges and shaping profiles
- Small workshops doing repetitive edge finishing, chamfering, and surface prep
- Woodworking and mixed-material shops needing both belt and disc sanding in one unit
- Resellers targeting high-demand bench sander category with a reliable, feature-complete unit
Key Specifications
Belt: 100 x 915mm
Disc: 305mm (12")
Motor: 750W, 230V/50Hz
Speed: 690 RPM (no-load)
Table tilt: 0-45 degrees
Belt tilt: 0-90 degrees
Table size: 190 x 125mm
1-year warranty. OEM/ODM available. Contact us for pricing and MOQ.
Frequently Asked Questions about Belt Disc Sander
From finishing applications to machine configuration - the questions buyers ask when sourcing a combination belt and disc bench sander.
Q: What is the Belt Disc Sander used for?
A: Deburring, edge finishing, shaping, chamfering, and surface prep on wood, metal, and mixed-material parts. The 100x915mm belt handles edges, profiles, and long-contact sanding; the 305mm (12") disc handles flat faces, squaring, and angle work.
Q: What's the advantage of a combined belt-and-disc design?
A: Two distinct sanding stations in one compact footprint. You switch between the long belt for edges and contours and the large 12" disc for flat-face and repeatable angle work - matching the tool to the task without a second machine.
Q: Is it suitable for both wood and metal?
A: Yes. It's built for mixed workshop use - woodworking, light metalworking, repair, and prototype finishing - especially where different sanding methods are needed on one machine.
Q: Is it flexible enough for angled sanding?
A: Yes. The worktable tilts 0–45° and the belt assembly tilts 0–90°, so you can lock in an angle and work repeatable bevels, chamfers, and edge profiles without re-marking each piece.
Q: Who typically buys this sander?
A: Hobby and DIY metalworkers, repair shops, small manufacturers, schools, and resellers targeting the high-demand bench sander category with a feature-complete, reliable unit. OEM/ODM available.
Hot Tags: belt disc sander, China belt disc sander suppliers, factory, bench sander, Belt Disc Sander, Wide Belt Disc Sander
